• 联系人:卢经理
  • 电话:0531-87416018
  • 手机:13853128178
  • 地址:济南市经十西路藤靳路
  • 口西2公里
新闻中心当前位置:首页-新闻中心
    机械加工的安全性怎么样?
    2020-1-14 15:27:29

      如今,机械加工技术一直受到工业界的高度重视。在机械零件的数控加工过程中,除了加工操作外,操作者还须注意自身的安全和保护。那么,在机床的操作中应注意哪些安全事项呢?

      Nowadays, machining technology has been highly valued by the industry. In the process of NC machining of mechanical parts, in addition to the machining operation, the operator must also pay attention to their own safety and protection. So, what safety precautions should be paid attention to in the operation of the machine tool?

      1、在数控加工机械零件时,一定要准备好工作,仔细检查它是否符合加工工作服的要求,记得带上你的帽子和手套等防护装备,记得要用领子和袖口,双腿绑在一起。

      1. When machining mechanical parts with numerical control, be sure to get ready for work, check whether it meets the requirements of working clothes carefully, remember to wear your hat, gloves and other protective equipment, remember to use collar and cuff, and bind your legs together.

      2、检查设备是否符合正常工作标准。这台机器的电压稳定。机器须是三角形插座和插座线。它需要在机器开动之前在地上奔跑。如果没有例外,它可以开始。

      2. Check whether the equipment meets the normal working standard. The voltage of this machine is stable. The machine must be triangle socket and socket cable. It needs to run on the ground before the machine starts. If there are no exceptions, it can start.

      3、在加工过程中,如果工件需要测量和检查,机器在机器停止运转后应与之接触。

      3. In the process of machining, if the workpiece needs to be measured and inspected, the machine should contact it after the machine stops running.

    琨鹏.jpg

      4、在任何时候,都不允许在机器操作过程中与手接触。它不能用手工纱布对零件进行磨削和加工,所以我们需要使用一些设备进行磨削。

      4. It is not allowed to touch hands during the operation of the machine at any time. It can't grind and process the parts by hand gauze, so we need to use some equipment for grinding.

      5、对于操作异常的机器,应及时发现更换零件或及时补充润滑油,机器应投入运行。

      5. For the machine with abnormal operation, it is necessary to timely find out the replacement parts or supplement the lubricating oil, and the machine shall be put into operation.

      6、机械加工完成后,手柄应处于中性位置。工作结束后,机器需要清洗和清洗,电源关闭。

      6. After machining, the handle shall be in neutral position. After the work, the machine needs to be cleaned and the power supply is off.

      想要了解更多有关济南机床加工的相关信息可以点击官网进行咨询:http://www.jnkpjx.com

      For more information about Jinan machine tool processing, please click the official website: http://www.jnkpjx.com