• 联系人:卢经理
  • 电话:0531-87416018
  • 手机:13853128178
  • 地址:济南市经十西路藤靳路
  • 口西2公里
新闻中心当前位置:首页-新闻中心
    铆焊加工前需要做好的各方面的准备!
    2019-12-12 15:34:47

      铆接加工作为一种现代新型的操作方法,其操作方法是非常严格的,相应的在操作前需要注意的各个方面也是非常重要的,在操作过程的各个方面都要注意哪些?下面文章济南铆接加工为您一一列举。

      Riveting as a new modern operation method, its operation method is very strict, and the corresponding aspects that need to be paid attention to before operation are also very important. What should be paid attention to in all aspects of the operation process? The following article Jinan riveting is listed for you one by one.

      首先,剪

      First of all, scissors.

      1. 切割前请检查切割件材料是否符合剪切机的切割要求。

      1. Before cutting, please check whether the cutting material meets the cutting requirements of the shearing machine.

      2. 对现场进行清洁,检查设备的工作情况,并进行试运行,确保设备工作正常。

      2. Clean the site, check the working condition of the equipment, and conduct trial operation to ensure the normal operation of the equipment.

      3.根据来料选择切割顺序,调整合适的刃口间隙。

      3. Select the cutting sequence according to the incoming materials, and adjust the appropriate blade clearance.

      4、裁切时要区分各种划线,并按剪切线裁切,裁切边和剪切线裁切。

      4. When cutting, various scribes shall be distinguished and cut according to the cutting line, cutting edge and cutting line.

      5. 多名操作人员必须紧密合作,听从一个人的指挥。

      5. Multiple operators must cooperate closely and follow the command of one person.

      2、孔加工

      2. Hole processing

      1、孔加工方法根据工艺要求或加工条件进行选择,并区分孔在下道工序的使用。

      1. The hole processing method shall be selected according to the process requirements or processing conditions, and the use of holes in the next process shall be distinguished.
    琨鹏.jpg

      2、钻孔机按操作规程加工钻孔。钻孔时,操作者应相互配合,手应放平,工作时需夹紧,钻头垂直于工作表面。

      2. The drilling machine shall process and drill holes according to the operating procedures. During drilling, the operator shall cooperate with each other, the hand shall be leveled, the work shall be clamped, and the drill bit shall be perpendicular to the working surface.

      3、铆钉孔的加工按铆接要求确定孔与钉的直径。

      3. The processing of rivet holes shall determine the diameter of holes and nails according to the riveting requirements.

      三、焊接坡口加工

      III. welding groove processing

      1. 根据工艺文件详细了解坡口形式和加工要求。

      1. Understand groove form and processing requirements in detail according to process documents.

      2、坡口加工方法根据技术要求,或根据坡口精度要求,选择加工条件。

      2. The groove processing method shall be selected according to the technical requirements or the groove accuracy requirements.

      通过上面的文章需要注意的问题铆接焊接加工的操作之前,我们可以看到,前的准备操作非常复杂,为了确保产品的质量和公司的声誉,经营者必须遵守操作规程,避免不必要的麻烦。

      Before the riveting welding operation, we can see that the preparation operation is very complex. In order to ensure the quality of products and the reputation of the company, operators must abide by the operation procedures to avoid unnecessary troubles.